#The last usb device you connected install#
#The last usb device you connected serial#
#The last usb device you connected drivers#
#The last usb device you connected driver#

A new popup window will open here expend USB Settings then again Expand USB selective suspend settings As shown below image.

Next, click on the Change Advanced Power Settings link. Now On the Power Options screen, click on Change Plan Settings link located next to the current Power Plan. Press Windows + R, type powercfg.cpl, and hit the enter key to open the Power Options window. Disable the USB selective suspend setting by following steps and check it helps. But sometimes this power-saving setting can sometimes cause problems like Error Code 43 and USB Device Not Recognized Error in Windows 10. Note: If you have more USB Root Hubs, you need to repeat this operation a couple of times.īy default, Windows computer is set to conserve power by suspending the power supply to external USB devices, whenever they are inactive. A new popup window will open move to the Power Management tab and uncheck the Allow the computer to turn off this device to save power.

#The last usb device you connected serial#

Change USB Root Hub SettingĪgain open device manager ( right-click on the start menu and select device manager ) Expand Universal Serial Bus Controllers at the bottom, Look for USB Root Hub option, Right-click on it, and select properties.

#The last usb device you connected drivers#

In case updates are available, the latest available device drivers will also be installed on your computer.

#The last usb device you connected install#

To check and install latest windows updates open Settings > Updates & Security -> Windows Update -> Check For UpdatesĪllow Windows to check for available updates and install them onto your computer. If an update is available, Windows will also install the latest available drivers for your computer. See if an Update is available for your computer. Now remove the USB device simply restart windows and re-connect the USB device check worked, If not visit the device manufacturer website, download and install the latest available driver. Select Generic USB Hub and click Next, Windows 10 will update the USB drivers.

#The last usb device you connected driver#

Then select Browse my computer for driver software -> Let me pick from a list of the available drivers on my computer. Then scroll down and Expand Universal Serial Bus Controller, locate the USB device with a yellow exclamation mark, right-click on it and select Update driver software. Press Windows+ R, type devmgmt.msc, and ok to open device manager. Update or Reinstall the USB device Driver to make sure outdated, incompatible Device driver not causing this USB device not recognized error. Sometimes Windows 10 won’t recognize the USB hard drive due to driver problems. If you still getting the same fallow the next solution. Again plug the USB into your computer and check.Īdditionally, try to connect the USB Device to Different USB ports especially Use the computer’s backside USB port this is very helpful for some users who fix USB not recognized issues for them. In This Case, plug your device into a different PC, let it load necessary drivers on that system, and then properly ejecting it. If previously the USB device has not been properly ejected it may cause this Error on the next to connect. Also, Disconnect all the other USB attachments restart the computer then try to check whether the USB is working or not. Just remove your USB device, restart your Windows computer, then again plug in your USB Device to see if it works or not. When your USB drive shows as ‘not recognized’ in your Windows PC, Here are some quick basic solutions to try.